New here? See how every chart is counted and its colour list checked before it goes on the site.

39 Christmas Tree Cross Stitch Kits: Gift-Ready Ideas

By kate15 Nov 202629 min readChristmas Cross Stitch Patterns0

Christmas tree cross stitch kits are only gift-ready when the chart, the floss and the finished size agree before you start. You want to see the tree on a mantel or a card first, then count. Below are 39 ideas, each with its size and colours, so you can pick one in a minute.

The worry I hear most is a chart that looks wrong, as if a machine wrote it. Lost evenings hurt more in December, because the gift has a date.

Quick answer: for a first gift, pick a tree under 60 stitches tall with six DMC colours or fewer. It finishes near 4 inches on 14 ct aida, which fits a 5-inch hoop or a folded card.

If you have three free weekends, a framed 100-stitch tree with backstitched lights makes the bigger present.

A Christmas tree chart is safe to gift when its stitch count, its DMC list and its centre mark all sit on the first page.

What is a Christmas tree cross stitch kit?

A Christmas tree cross stitch kit is a boxed set with a printed chart, pre-cut aida, sorted DMC floss and a needle, all for one tree design. It differs from a loose pattern because the colours are already counted out.

Every kit in this row ships with fabric, sorted floss and a needle, so a christmas tree cross stitch kits hoop can start the day it arrives. Picked by rating and number of reviews, not by price.
Printed kits suit a first project, counted kits suit a stitcher who reads charts.

View More on Amazon

Dimensions

Dimensions

8778, Santa Claus, Gold Collection Personalizable Counted Cross Stitch Christmas Stocking Kit, 16" Long, 16 Cn

View on Amazon

Santune Christian Embroidery kit

Santune Christian Embroidery kit

Nativity Scene Needlepoint Cross Stitch Kits for Beginners Adult,Needle Point Sets,4 Embroidery,2 Hoops,Christ

View on Amazon

You open it and start the same evening. That suits gift makers on a deadline.

How do you choose Christmas tree cross stitch kits?

  • Size in stitches and inches. Divide the width by 14 for the finished size → free charts often skip the count, and you learn the frame is wrong too late.
  • Number of DMC colours. Six to ten is gift-friendly → a free chart may list 27 shades you then buy one by one.
  • A chart you can read. Look for bold symbols, a marked centre and a 10-stitch grid → blurry free PDFs merge two greens into one symbol.

1. Classic green tree with a gold star

A classic green Christmas tree with a gold star belongs in a 6-inch hoop above your mantel. You can also frame it as a gift for a grandmother.

The design shows a layered fir in three greens, red bauble dots and a five-point star. Snow sits at the base.

You need DMC 890, 986 and 702 for branches, 321 for baubles, 783 for the star and blanc for snow.

The chart runs about 70 by 84 stitches, near 5 by 6 inches on 14 ct aida.

The star is the tricky spot. Its top point must sit on one column, as in our favourite star designs. I count it off the trunk’s centre.

  • Best for: a first framed Christmas gift
  • Avoid for: a card smaller than 5 inches

2. Mini tree ornament with felt back

A mini tree ornament hangs on your own tree or ties onto a wrapped gift as a tag. You finish it with felt backing and a ribbon loop.

The design is a simple triangle tree with a brown trunk and three tiny bauble crosses. It reads clearly across a room.

You need DMC 699 for the tree, 898 for the trunk, 666 for baubles and 726 for the topper.

The chart is 28 by 34 stitches, about 2 by 2.4 inches on 14 ct aida. You can stitch one in an evening.

The tricky spot is the cut edge. I leave six squares of aida around the design before trimming. Less, and the felt shows gaps.

  • Best for: a batch of ornaments for a craft fair
  • Avoid for: stitchers who dislike glue finishing

3. Tiny tree for a Christmas card

A tiny tree motif fits the front of a folded Christmas card you post in early December. The person you send it to can frame it later.

The design is one small fir with a star, worked in two greens. No background stitching is needed.

You need DMC 700 and 909 for the greens, 783 for the star and 3865 for a snow line.

The chart is 22 by 30 stitches, about 1.6 by 2.1 inches on 14 ct aida. It sits inside a 3-by-4-inch aperture card.

The tricky spot is centring the window. I trace the card opening on the aida with a water-soluble pen. Then you stitch inside the line.

  • Best for: a last-minute card stitched in one evening
  • Avoid for: anyone wanting a big wall piece

4. Buffalo plaid tree pillow

A buffalo plaid Christmas tree sits on your sofa as a cushion front from Thanksgiving to January. It makes a cosy gift for a new home.

The design shows a tree filled with red and black check on a cream ground. A small star tops it.

You need DMC 321 and 310 for the plaid, 815 for shadow squares and 783 for the star.

The chart runs about 98 by 120 stitches, near 7 by 8.6 inches on 14 ct aida. It sews onto a 12-inch cover.

The tricky spot is the check repeat. Each block is four stitches wide. I pencil a line every fourth row, so you never lose the block.

  • Best for: a housewarming gift for a plaid lover
  • Avoid for: a beginner’s very first project

5. Red farm truck hauling a tree

A red farm truck carrying a Christmas tree suits a framed gift for a dad or grandad. You can hang it in a study or hallway.

The design shows a vintage pickup with a fir tied in the bed and two wrapped parcels. The road is one backstitch line.

You need DMC 321 for the truck, 310 for tyres, 890 and 702 for the tree, and 762 for chrome.

The chart is 84 by 56 stitches, about 6 by 4 inches on 14 ct aida.

The tricky spot is the wheels. Round shapes need fractional stitches. I swap them for full crosses where the chart allows. You lose very little shape.

  • Best for: a man who collects old trucks
  • Avoid for: a round ornament frame

6. Tree inside a snow globe

A tree inside a snow globe belongs on a small easel on your bookshelf or a winter side table. It also suits a gift for a teen.

The design shows a lone fir in a glass dome, with snowflakes and a wooden base. The dome is outlined in backstitch.

You need DMC 986 and 702 for the tree, 3761 for the glass tint, 801 for the base and blanc.

The chart is 60 by 70 stitches, about 4.3 by 5 inches on 14 ct aida.

The tricky spot is the pale glass. Blue on white aida can vanish under a lamp. I test one strand against two first. You see the difference at once.

  • Best for: a display that stays up past New Year
  • Avoid for: dark aida, where the tint disappears

7. One-colour blackwork tree

A blackwork Christmas tree in one colour suits a modern flat with white walls. You frame it in plain black and it stays up all winter.

The design fills a tree shape with geometric backstitch patterns. There are no full crosses. It looks like lace.

You need only DMC 310: one strand for fine fills and two for the outline.

The chart is about 64 by 90 stitches, near 4.6 by 6.4 inches on 14 ct aida.

The tricky spot is thread travelling across the back. It shows through pale fabric. I end and restart every 2 inches. You keep the front clean.

  • Best for: stitchers who prefer backstitch to crosses
  • Avoid for: a child’s first kit

8. Gold metallic tree on navy aida

A gold Christmas tree on navy aida glows on your Christmas Eve table as a framed centrepiece. It also makes an elegant hostess gift.

The design is a slim spiral tree drawn in gold, with tiny white stars scattered around it. There is no background fill.

You need DMC E3821 light-effects gold, 3865 winter white for the stars and navy aida as the sky.

The chart is 50 by 80 stitches, about 3.6 by 5.7 inches on 14 ct aida.

The tricky spot is metallic thread. It frays and kinks. I cut 12-inch lengths and use a size 24 needle. You will thank yourself by row ten.

  • Best for: an adult gift with a dressed-up look
  • Avoid for: stitching late at night in poor light

9. Tree farm landscape with a red barn

A tree farm landscape fits a wide frame over your dining sideboard all winter. It suits a family that cuts its own tree each year.

The design shows rows of firs on a hill, a red barn and a fence. A sky gradient sits behind.

You need DMC 890, 986, 702 and 704 for trees, 321 for the barn, and 3761 and 3325 for the sky.

The chart runs 140 by 90 stitches, about 10 by 6.4 inches on 14 ct aida.

The tricky spot is the sky. Large fills drain floss fast. I buy a spare skein of 3325 before starting, so you never run short mid-row.

  • Best for: experienced stitchers with six weeks to spare
  • Avoid for: a gift due next week

10. Tree glowing in a cottage window

A tree glowing in a cottage window suits a new homeowner’s first Christmas. You can frame it small for a hallway shelf.

The design shows a white house front with a lit window, a tree inside and a wreath on the door. It pairs well with our house cross stitch patterns.

You need DMC 3865 for walls, 726 for window light, 986 for the tree and 321 for the door.

The chart is 70 by 64 stitches, about 5 by 4.6 inches on 14 ct aida.

The tricky spot is the window frame. It is a thin backstitch grid. I stitch it last. You avoid snagging the tree crosses.

  • Best for: a new home gift with the house number added
  • Avoid for: someone who wants a tree-only display

11. Tree with named presents for grandparents

A tree with wrapped presents and family names makes a keepsake for grandparents. You hang it in their living room every December.

The design shows a full tree with one parcel per person below. Each name goes on a gift tag.

You need DMC 890 and 702 for the tree, 321, 3761 and 3713 for parcels, and 310 for lettering.

The chart is about 90 by 110 stitches, near 6.4 by 7.9 inches on 14 ct aida.

The tricky spot is the names. Long names overflow the tag. I chart each name on graph paper first. You keep one blank column on each side.

  • Best for: grandparents with four to six grandchildren
  • Avoid for: a family of ten or more names

12. Baby’s first Christmas tree with the year

A baby’s first Christmas tree goes on the nursery wall, then into a memory box. It is the gift new parents keep, and you can stitch it in two weeks.

The design shows a soft pastel tree, a little star, the baby’s name and the year 2026.

You need DMC 3817 for mint, 3713 for pink, 3747 for pale blue and 3865 for the star.

The chart is 60 by 80 stitches, about 4.3 by 5.7 inches on 14 ct aida.

The tricky spot is the numerals. A 6 and a 0 look alike when small. I work the digits in backstitch. You can read them across the room.

  • Best for: a newborn gift for December babies
  • Avoid for: a summer baby, unless you change the wording

13. Bookmark with a row of five trees

A bookmark with a row of small trees slips into a gift book for a reader or a teacher. You can stitch three in one weekend.

The design repeats five little firs in a line above a snow border. Each tree is identical.

You need DMC 909 and 700 for the trees, 898 for trunks and blanc for snow.

The chart is 24 by 110 stitches, about 1.7 by 7.9 inches on 14 ct aida band.

The tricky spot is spacing. A one-square drift adds up over five trees. I count each gap from the last trunk, not from the edge. Count twice.

  • Best for: a book lover’s stocking filler
  • Avoid for: a wall display

14. Advent calendar tree with 24 spots

An advent calendar tree hangs by the kitchen door from 1 December. Each day you add a button or move a marker. Children love it.

The design is a large tree with 24 numbered spots in place of baubles. A star tops number 24.

You need DMC 890 and 986 for the tree, 321 for the numbers, 783 for the star and blanc.

The chart runs 110 by 150 stitches, about 7.9 by 10.7 inches on 14 ct aida. Start it in October.

The tricky spot is 24 small numerals. Double digits take space. I chart them in backstitch so you keep the tree shape intact.

  • Best for: families with small children counting down
  • Avoid for: a gift that must be done this week

15. Scandinavian folk tree in red

A Scandinavian folk tree in red on white suits a framed piece in a Nordic kitchen. You can leave it up through February.

The design is a symmetrical tree of hearts, stars and stepped branches. Only one colour is used.

You need DMC 321 or 666 on white 14 ct aida. One skein usually covers it.

The chart is 58 by 78 stitches, about 4.1 by 5.6 inches on 14 ct aida.

The tricky spot is the mirror image. A miscount on the left repeats wrongly on the right. I stitch the centre column first. You then build out each side.

  • Best for: a minimalist gift for a red-and-white kitchen
  • Avoid for: someone who wants many colours

16. Geometric tree of stacked triangles

A modern geometric tree of stacked triangles hangs well in a home office. You can give it as a Secret Santa gift to a colleague.

The design builds a tree from seven triangles in shifting greens and teal. There is no trunk. It reads well at a distance.

You need DMC 3812, 991, 702, 704, 909 and 3814 for the triangle shades.

The chart is 56 by 70 stitches, about 4 by 5 inches on 14 ct aida. It fits a 5-by-7 frame with a mat.

The tricky spot is the diagonal edges. Each triangle steps one stitch per row. I check every edge with a ruler on the chart. You see a drift at once.

  • Best for: a modern office or Secret Santa gift
  • Avoid for: a traditional cottage room

17. Rainbow pastel tree for a teen room

A rainbow pastel tree brightens a teen’s bedroom wall or a dorm door in December. You break the red-and-green habit with it.

The design stacks seven stripes from pink at the top to blue at the base. A white star sits on top.

You need DMC 3713, 3824, 745, 3817, 3747, 211 and blanc. One skein of each is plenty.

The chart is 50 by 66 stitches, about 3.6 by 4.7 inches on 14 ct aida.

The tricky spot is the pale shades. 745 and 3824 look alike under warm light. I label each bobbin before starting. You stop guessing at the key.

  • Best for: teens and pastel lovers
  • Avoid for: a traditional family room

18. Tree border on a guest hand towel

A tree border on a hand towel dresses the guest bathroom when family visits. You can give a matched pair as a hostess gift.

The design runs a line of small firs across an aida band sewn onto the towel. Snow dots sit between them.

You need DMC 986 and 702 for the trees, 321 for tiny baubles and blanc.

The band is 30 stitches deep by about 200 long, so 2.1 by 14.3 inches on 14 ct aida band.

The tricky spot is washing. Red can run. I rinse the finished band in cold water before sewing it on. You keep the white towel white.

  • Best for: a practical gift that gets used
  • Avoid for: a towel narrower than 15 inches

19. Set of tiny tree gift tags

Tiny tree gift tags tie onto your wrapped presents and become ornaments afterwards. You can make a dozen from one set of floss.

The design is a 1-inch tree in four styles: plain, starred, snowy and dotted. Each one stitches in under an hour.

You need DMC 700, 702, 890, 783 and 321. A few strands of each are plenty.

Each tag is 16 by 20 stitches, about 1.1 by 1.4 inches on 14 ct aida.

The tricky spot is the backing. Thin felt curls. I glue the aida to card first, then add felt. You get a flat tag that takes a name.

  • Best for: people who wrap many presents
  • Avoid for: a single show-piece gift

Halfway through the list is a good moment to pick a kit for the next evening. These sets keep the colours already matched to the chart.
Check the fabric count on the listing before you buy, since 11, 14 and 16 count stitch up at different sizes.

View More on Amazon

20. Tree band for a named stocking cuff

A tree band on a stocking cuff turns a plain stocking into a named heirloom. You hang it on the fireplace each Christmas Eve.

The design runs three firs beside a name, in a strip that wraps the cuff. Names up to eight letters fit.

You need DMC 890 and 986 for the trees, 321 for the name and 3865 for snow.

The strip is 40 by 140 stitches, about 2.9 by 10 inches on 14 ct aida.

The tricky spot is the seam. The cuff is a loop, so both ends must be clean. I leave 10 blank stitches at each end. You seam without cutting a tree.

  • Best for: a child’s first named stocking
  • Avoid for: names over eight letters

21. Tree-topper star over a small fir

A tree-topper star above a small fir works as a December card for a friend who loves the night sky. You can also fit it in a 4-inch hoop.

The design makes the star the hero, with long rays. The tree is only a small green base.

You need DMC 783 and 725 for the star, 3865 for the glint and 700 for the tree.

The chart is 44 by 56 stitches, about 3.1 by 4 inches on 14 ct aida.

The tricky spot is the ray tips. Each must end in a single cross. I check that the width is an odd number. You avoid a split top point.

  • Best for: star lovers and quick hoop gifts
  • Avoid for: someone who wants a full tree

22. Woodland pine with a sleeping fox

A woodland tree with a sleeping fox suits a cabin wall or a nature lover’s gift. You can leave it up from November to March.

The design shows a snowy pine with a curled red fox at its base and a robin on a branch.

You need DMC 720 and 721 for the fox, 310 for the nose, 890 and 702 for the pine, and 3865 for snow.

The chart is 80 by 90 stitches, about 5.7 by 6.4 inches on 14 ct aida.

The tricky spot is the white tail tip. On cream aida it disappears. I outline it in DMC 762 grey backstitch. You see the shape again.

  • Best for: a winter piece that is not only Christmas
  • Avoid for: a child who wants bright colours

23. Word tree reading “Merry and Bright”

A tree made of the words “Merry and Bright” fits a kitchen shelf or an office desk frame. You give it to anyone who loves lettering.

The design stacks the letters in a triangle, with a star above. Small dots act as lights.

You need DMC 890 for letters, 783 for the star, and 321, 726 and 3761 for the light dots.

The chart is 60 by 80 stitches, about 4.3 by 5.7 inches on 14 ct aida.

The tricky spot is letter spacing. One extra column makes words lean. I count from the centre letter outward. You keep the triangle even on both sides.

  • Best for: lettering fans and desk gifts
  • Avoid for: a nursery

24. Set of four tree coasters

A set of four tree coasters goes on the coffee table for holiday guests. You can wrap the set as one teacher or neighbour gift.

The design shows four small trees, each with a different topper: star, bow, bird and heart. They match without being copies.

You need DMC 986, 702, 321, 783 and 3713. One skein of each covers all four.

Each coaster is 40 by 40 stitches, about 2.9 inches square on 14 ct aida.

The tricky spot is fitting acrylic coaster blanks. The insert is often 3 inches. I measure the blank before cutting. You keep a margin of four squares.

  • Best for: a neighbour or teacher gift set
  • Avoid for: use without acrylic blanks

25. Tree in a mason jar

A Christmas tree in a mason jar suits a farmhouse kitchen. You can frame it or use it as a jar-lid topper on a cookie gift.

The design shows a small fir inside a jar, with a gingham ribbon around the rim. It reads as farmhouse at a glance.

You need DMC 702 and 890 for the tree, 762 and 413 for the glass, and 321 for the ribbon.

The chart is 46 by 62 stitches, about 3.3 by 4.4 inches on 14 ct aida.

The tricky spot is the glass outline. Grey backstitch looks heavy in two strands. I use one strand. You still see the jar clearly.

  • Best for: a cookie-jar gift for a baker
  • Avoid for: a formal living room

26. Pine silhouettes under a crescent moon

A pine forest under a crescent moon suits a bedroom wall for long December nights. You can give it as a calm gift to a night owl.

The design shows black pine silhouettes on a navy sky, with a pale moon like our crescent moon charts.

You need DMC 310 for the pines, 336 and 3750 for the sky, and 3865 for the moon.

The chart is 100 by 70 stitches, about 7.1 by 5 inches on 14 ct aida.

The tricky spot is black on navy. They blur in dim light. I stitch the pines in daylight only. You save your eyes and your count.

  • Best for: a quiet, non-traditional winter piece
  • Avoid for: evening-only stitchers

27. Teacher tree with apples and a pencil star

A tree decorated with tiny apples makes a gift for a teacher before winter break. You can set it on a classroom desk in a mini frame.

The design shows a small fir with red apple baubles and a pencil as the star.

You need DMC 986 and 702 for the tree, 321 for apples, 726 for the pencil and 310 for its tip.

The chart is 42 by 56 stitches, about 3 by 4 inches on 14 ct aida.

The tricky spot is the pencil star. It runs on a diagonal. I stitch it in half crosses to keep the line thin. You get a sharp point.

  • Best for: a teacher gift you finish in a weekend
  • Avoid for: a large framed display

28. Cat climbing the Christmas tree

A cat climbing the Christmas tree is a gift for any pet owner who has rescued a bauble at midnight. You hang it in the hallway.

The design shows a grey tabby halfway up the tree, a bauble falling and tinsel askew. It always gets a laugh.

You need DMC 413, 318 and 762 for the cat, 890 and 986 for the tree, and 666 for the bauble.

The chart is 70 by 90 stitches, about 5 by 6.4 inches on 14 ct aida.

The tricky spot is the tabby stripes. Three greys sit close. I sort them on a card with the DMC numbers. You stop mixing 318 and 413.

  • Best for: cat owners and humour gifts
  • Avoid for: a formal heirloom

29. Fir strapped to a wooden sled

A tree tied to a wooden sled suits a front-door hanger from late November. You welcome guests with it before they knock.

The design shows a small fir strapped to a red sled, with a lantern and snow. A rope crosses the trunk in backstitch.

You need DMC 321 for the sled, 801 for wood, 986 for the tree and 726 for the lantern glow.

The chart is 90 by 50 stitches, about 6.4 by 3.6 inches on 14 ct aida.

The tricky spot is the curved runners. I swap three-quarter stitches for full ones where the chart lets me. You keep the curve smooth.

  • Best for: a door hanger finished as a flat pillow
  • Avoid for: an outdoor spot exposed to rain

30. Victorian sampler with a tree and alphabet

A Victorian sampler with a tree and alphabet suits a framed heirloom for a grown daughter. You date it 2026 and it marks the year.

The design sets a central fir between two alphabet rows, with a floral border and initials. Two birds face the tree.

You need DMC 3768, 924, 3721, 3829 and 3865. Muted shades read as old linen.

The chart runs 120 by 160 stitches, about 8.6 by 11.4 inches on 14 ct aida.

The tricky spot is the border corners. They must meet exactly. I stitch the border first, then fill. You find a miscount early. Count twice at each corner.

  • Best for: an experienced stitcher making an heirloom
  • Avoid for: a gift due in two weeks

31. Chunky tree fridge magnet

A tree fridge magnet holds a family’s Christmas list on the kitchen door. You can tuck one into every stocking.

The design is a chunky fir with a yellow star and three bauble dots. Bold shapes read well at small size.

You need DMC 699, 726, 321 and 3761. One small skein of each makes six magnets.

The chart is 20 by 26 stitches, about 1.4 by 1.9 inches on 14 ct aida.

The tricky spot is magnet strength. Thick felt weakens it. I glue the aida to thin card and a strong round magnet. You get one that holds paper.

  • Best for: stocking fillers for a big family
  • Avoid for: a wall piece

32. Tree with backstitch lights and French knots

A tree lit with backstitch lights and French knots glows as a framed side-table piece for Christmas Eve. You learn a new skill while you stitch it.

The design shows a dark green tree wrapped in a looping light string, with knots for bulbs.

You need DMC 890 for the tree, 310 for the wire, and 726, 321, 3761 and 3713 for bulbs.

The chart is 64 by 88 stitches, about 4.6 by 6.3 inches on 14 ct aida.

The tricky spot is the order. Knots go last. I add them after all the backstitch. You avoid catching them with the needle.

  • Best for: intermediate stitchers learning knots
  • Avoid for: an item washed often

33. Child’s first tree in full crosses

A chunky first tree lets a child aged eight or older stitch a gift for a grandparent. You can hang it on the fridge or the tree.

The design is a bold triangle tree with five baubles and a star. Every shape is a full cross.

You need DMC 699, 898, 321, 726 and blanc. Five colours keep it simple.

The chart is 30 by 40 stitches, about 2.1 by 2.9 inches on 14 ct aida.

The tricky spot for children is the back. Knots pull through. I teach the loop start with two strands. You end up with fewer tears.

  • Best for: children aged eight to twelve
  • Avoid for: under-sixes, who need plastic canvas

34. Table runner ends with rising firs

A table runner with a row of firs at each end dresses the Christmas dinner table. You stitch both ends to match. Spills rinse out in cold water.

The design runs seven firs of rising height along a band, with a snow line below.

You need DMC 890, 986, 702, 704 and blanc. Two skeins of 890 cover both ends.

Each end is 60 by 180 stitches, about 4.3 by 12.9 inches on 14 ct aida.

The tricky spot is matching both ends. A one-row shift shows on a table. I stitch both on one long strip first. You trim them apart later.

  • Best for: a host who sets a long table
  • Avoid for: a small round table

35. Peppermint candy tree with no green

A peppermint candy tree suits a candy-cane kitchen or a gift for someone with a sweet tooth. You hang it near the cookie jar.

The design shows a tree built from round red-and-white peppermints, with a gingerbread star. There is no green at all.

You need DMC 321 and blanc for the peppermints, and 434 and 3865 for the gingerbread star.

The chart is 52 by 66 stitches, about 3.7 by 4.7 inches on 14 ct aida. It fits a 5-inch hoop.

The tricky spot is the swirl. Each candy has six stripes. I stitch every red section first. Then you fill the white, and the swirl stays true.

  • Best for: a playful kitchen piece
  • Avoid for: a green-and-gold traditional room

36. Tree patch for a canvas tote bag

A tree patch on a canvas tote bag carries gifts to a holiday party, and the bag is the present too. You use it all year.

The design is a stylised fir with a wrapped parcel at its base, framed by a stitched rectangle.

You need DMC 986, 702, 321, 3761 and 310. Cotton floss survives a gentle wash.

The patch is 70 by 84 stitches, about 5 by 6 inches on 14 ct aida.

The tricky spot is attaching it. Aida frays at the edge. I zigzag the edge on a sewing machine first. You can then hand-stitch it to the bag.

  • Best for: reusable gift wrap
  • Avoid for: a hot-wash routine

37. Tree hung with heart ornaments for a couple

A tree hung with heart ornaments suits a couple’s first Christmas, framed for their mantel. You can also give it as a December anniversary gift.

The design shows a slim fir with red hearts in place of baubles, much like our small heart patterns. Initials sit below.

You need DMC 986 and 702 for the tree, 321 and 3713 for hearts, and 783 for initials.

The chart is 50 by 72 stitches, about 3.6 by 5.1 inches on 14 ct aida.

The tricky spot is heart size. Under 5 stitches, hearts look like dots. I keep each one 5 by 4. You see them as hearts.

  • Best for: a couple’s first Christmas together
  • Avoid for: a child’s room

38. Snowman decorating a tree

A snowman decorating a tree suits a playroom wall or a family den in December. Your children spot new details each year.

The design shows a snowman on a step stool hanging a bauble, with a scarf and carrot nose. A small dog watches.

You need DMC blanc and 762 for the snowman, 321 for the scarf, 740 for the nose and 890 for the tree.

The chart is 76 by 92 stitches, about 5.4 by 6.6 inches on 14 ct aida.

The tricky spot is a white snowman on white aida. I outline him in 762 backstitch, last. You can also choose pale blue aida.

  • Best for: a family den or playroom
  • Avoid for: a minimal adult room

39. Large heirloom tree with a named ornament each

A large heirloom Christmas tree, with an ornament for each person, is the framed gift a family keeps for decades. You hang it in the dining room.

The design shows a tall fir with up to twelve named ornaments, a star and wrapped gifts below.

You need DMC 890, 986, 702, 704, 321, 783, 3761, 3713, and 310 for names.

The chart runs 154 by 196 stitches, about 11 by 14 inches on 14 ct aida. Start by October.

The tricky spot is the name alphabet. Mixed fonts look messy. I stitch every name from one 5-stitch alphabet. You keep the ornaments even.

  • Best for: an heirloom for a large family
  • Avoid for: anyone short on time this December

Pick a kit and stitch one of these christmas tree cross stitch kits ideas tonight. A complete kit saves the trip for floss and fabric.
Gift sets with two or three hoops work well for a stitching friend.

View More on Amazon

Dimensions Stamped Cross Stitch Baby Quilt 34" X 43"

Dimensions Stamped Cross Stitch Baby Quilt 34" X 43"

Dimensions Stamped Cross Stitch Baby Quilt 34" X 43"

View on Amazon

Bradove Alphabet Embroidery Kit for Beginners with Patterns

Bradove Alphabet Embroidery Kit for Beginners with Patterns

Bradove Alphabet Embroidery Kit for Beginners with Patterns

View on Amazon

If it goes wrong

  • The chart looks wrong halfway. Stop and recount from the marked centre. If two greens share a symbol, colour the key with pencils before the next row.
  • You run out of one shade. Buy the same DMC number, not a close green. The new skein blends in.
  • The tree is too big for the frame. Divide stitches by 14 before cutting. I add 3 inches of aida on every side for framing.
  • The tree leans. One extra stitch in the trunk column tilts everything. Unpick back to the trunk. It is faster than fudging branches.
  • White motifs vanish. Outline snow and stars in DMC 762 one-strand backstitch. You get the shape back in an hour.

Key takeaways

  • Divide the stitch width by 14 for inches on 14 ct aida before you buy a frame.
  • Pick six to ten DMC colours for a gift due within a month.
  • Stitch the trunk or centre column first, then build out.
  • Add backstitch and French knots last, never first.
  • Start large framed trees in October and small ornaments in December.

When the free version isn’t enough

A free Christmas tree chart gives you the picture, not the floss. You still sort greens by hand and hope the count is right.

A full kit fixes that: pre-cut 14 ct aida, floss sorted to the colour key and a checked chart with a marked centre. I reach for a kit whenever a gift has a date.

After Christmas, the same rule carries into our Valentines cross stitch patterns and gift kits.

Common questions

How long does a Christmas tree cross stitch kit take to finish?

A small Christmas tree kit of about 30 by 40 stitches takes two to four evenings. A framed 70 by 84 tree takes two or three weekends. A family heirloom tree of 154 by 196 stitches needs six weeks or more at an hour a day.

What size aida is best for Christmas tree cross stitch kits?

14 ct aida suits most Christmas tree cross stitch kits. It holds two strands of DMC floss neatly, and the maths is easy: divide stitches by 14 for inches. Move to 11 ct for children or 16 ct for very small ornaments.

How many DMC colours does a cross stitch Christmas tree need?

A cross stitch Christmas tree reads clearly with three greens, one brown and one accent. That is five DMC colours, such as 890, 986, 702, 898 and 321. Add a gold for the star. Past twelve colours, a gift project slows down a lot.

Can a beginner stitch a Christmas tree kit as a gift?

A beginner can stitch a Christmas tree kit as a gift if the design stays under 60 stitches and uses full crosses only. Skip metallics and French knots at first. Start three weeks before the date, and you keep a safe buffer.

Why does my Christmas tree cross stitch chart look wrong?

A Christmas tree chart often looks wrong because two greens share near-identical symbols, or a page edge is cropped. Check the colour key against the grid before you start. A marked centre and a 10-stitch grid prevent most counting errors.

Designs that fit this guide

Browse the full catalog

More from Stitch Cottage