A cross stitch alphabet works when every letter shares one height in stitches, so words line up without guessing. Pick the use first, then the height.
Your fear is a chart where the B is one row taller than the A. You find out at the third letter. Every idea below gives you the height, the width and the tricky spot first.
Quick answer: for a name on a 5-inch hoop, use a block alphabet 9 stitches tall. For a framed sampler, pick a serif alphabet 11 stitches tall with 2 blank rows between lines.
Pick the letter height in stitches first; every other choice follows from it.
What is a cross stitch alphabet?
A cross stitch alphabet is a counted chart of 26 letters, each built from full crosses on the same grid height. You copy letters from it to spell a name, a date or a quote.
It differs from a picture chart because you design the layout yourself. Block alphabets suit beginners. Script and serif alphabets need half stitches or backstitch, so they suit stitchers with a few finishes.
Every kit in this row ships with fabric, sorted floss and a needle, so a cross stitch alphabet hoop can start the day it arrives. Picked by rating and number of reviews, not by price.
Printed kits suit a first project, counted kits suit a stitcher who reads charts.
Bradove Alphabet Embroidery Kit for Beginners with Patterns
Bradove Alphabet Embroidery Kit for Beginners with Patterns
Santune 3 Sets Embroidery Kit
Cross Stitch Kits for Beginners,Needlepoint Kits for Adults with Easy Floral Pattern Hand Crafts,Hoop,Needle,M
1. Classic alphabet cross stitch sampler
A classic alphabet cross stitch sampler hangs framed above a writing desk all year. It also makes a fine first-finish gift for a friend who just learned to stitch.
The design shows A to Z in three rows of serif capitals. A thin vine border and your initials close it at the bottom.
You need DMC 815 for the letters, 3768 for the vine and 3865 for small highlights. Three colours keep it calm.
At about 140 by 90 stitches, you get near 10 by 6.5 inches on 14 ct aida.
The tricky spot is spacing. Most letters sit 1 stitch apart, but I and J need 2. I pencil a dot after each finished letter, so you never lose your place.
- Best for: stitchers who want one heirloom piece for a wall
- Avoid for: a gift due this weekend
2. Single initial for a wedding ring pillow
A single initial monogram sits on a wedding ring pillow for the ceremony. Afterwards you move it to a 4-inch hoop in the couple’s bedroom.
The design shows one tall serif capital inside a thin oval of olive leaves.
You need DMC 3865 for the letter on ivory aida, 3053 for the leaves and 3047 for a soft gold edge. Tone on tone looks quiet in wedding photos.
At about 48 by 60 stitches, you get near 3.5 by 4.3 inches on 14 ct aida.
The tricky spot is the thin serifs, built from half stitches. I stitch them last, so you can see exactly where the full crosses end.
- Best for: a wedding ring pillow or a bridal shower gift
- Avoid for: dark aida, where tone on tone vanishes
3. Baby name birth sampler
A baby name birth sampler goes on the nursery wall the week the baby arrives. Later it moves to a shelf in a teenager’s room.
The design shows the first name in large block capitals. Below sit the date, the weight and a row of tiny hearts.
You need DMC 3755 or 3326 for the name, 818 for the hearts and 413 for the date. Pick the name colour last.
At about 100 by 120 stitches, you get near 7 by 8.6 inches on 14 ct aida.
The tricky spot is centring a long name like Alexander. I add up every letter width plus the gaps and halve it. Then you start in the right column.
- Best for: a new baby gift from a grandparent
- Avoid for: first-time stitchers on a tight deadline
4. Christmas stocking name letters
Christmas stocking name letters go on the white cuff of a family stocking. You hang it on the mantel from the first of December.
The design spells one first name in chunky block capitals, 10 stitches tall. A small star at each end comes from our star cross stitch designs.
You need DMC 321 for the letters, 699 for a green underline and 3821 for the stars.
For a six-letter name like OLIVIA, you get about 53 by 10 stitches, near 3.8 by 0.7 inches on 14 ct aida.
The tricky spot is a ready-made cuff you cannot hoop. I fold it in half to find the centre. Then you start with the middle letter.
- Best for: a family stocking set at Christmas
- Avoid for: names longer than nine letters on a small cuff
5. Tiny backstitch cross stitch letters for bookmarks
Tiny backstitch letters fit a bookmark for a book club friend or a teacher at the end of term. You can finish one in an evening.
The design spells a short line, such as a name or “one more chapter”, in letters only 5 stitches tall.
You need DMC 310 for the letters and one accent, like 3842 blue, for a tiny border line.
On a 2 by 7 inch aida band, you get about 28 by 98 stitches on 14 ct. Most quotes fill half.
The tricky spot is the backstitch itself. Use one strand, never two. Two strands blur the letters. I keep each backstitch one square long.
- Best for: book club friends and teachers
- Avoid for: beginners who have never done backstitch
6. Bold block letters cross stitch door sign
A bold block letters sign hangs on a child’s bedroom door. It works as a fifth birthday gift, when kids start reading their own name.
The design spells a name like SAM’S ROOM in fat capitals, each letter a different bright colour. Kids can read it from the hallway.
You need DMC 666 red, 307 yellow, 996 blue and 702 green. Four colours rotate, so you never put two neighbours in one shade.
With letters 14 stitches tall, you get about 90 by 20 stitches, near 6.4 by 1.4 inches on 14 ct aida.
The tricky spot is colour changes. I park each thread at the edge, so you skip cutting and restarting every letter.
- Best for: beginners and a child’s fifth birthday
- Avoid for: a formal living room
7. Floral initial for Mother’s Day
A floral initial makes a Mother’s Day gift in a 6-inch hoop. Many mothers keep it on the kitchen windowsill all spring.
The design shows one serif capital with climbing roses and leaves wrapped around its stem. Pick her first initial or her surname.
You need DMC 3350 and 3354 for the roses, 3346 and 3347 for leaves and 3371 for the letter. Five colours give the petals depth.
At about 60 by 60 stitches, you get near 4.3 inches square on 14 ct aida.
The tricky spot is where leaves cross the letter. I stitch the whole letter first. Then you fill the leaves around it without miscounting.
- Best for: Mother’s Day in a 6-inch hoop
- Avoid for: stitchers who dislike frequent colour changes
8. Gothic blackletter for a Halloween mantel
A gothic blackletter alphabet suits a Halloween sign on the mantel in October. You can also stitch a family name for a moody bookshelf.
The design spells a short word like BOO or HAUNT in tall, pointed medieval capitals.
You need DMC 310 for the letters and 3853 orange for a thin shadow. Add 550 purple if you want a spooky accent.
With letters 16 stitches tall, you get HAUNT at about 75 by 16 stitches, near 5.4 by 1.1 inches on 14 ct aida.
The tricky spot is the diagonal strokes, made of three-quarter stitches. I pierce the centre of each square, so you keep the points sharp.
- Best for: an October mantel display
- Avoid for: first projects, because of the three-quarter stitches
9. Script wedding date sampler
A script wedding sampler hangs framed in the couple’s hallway. It is the gift you send three months after the wedding, when the rush is over.
The design shows both first names in flowing cursive, the date in small capitals and two linked rings.
You need DMC 3768 for the names, 3865 for the rings and 3047 for the date.
At about 120 by 70 stitches, you get near 8.6 by 5 inches on 14 ct aida.
The tricky spot is the joins between cursive letters. They are backstitch, not crosses. I stitch all crosses first. Then you see the whole word before the lines go in.
- Best for: a wedding or anniversary gift
- Avoid for: beginners new to backstitch
10. JOY ornament for the Christmas tree
A JOY ornament hangs on the Christmas tree, and a set of three makes a quick swap gift for the office. You can finish one in an evening.
The design spells JOY in a small 7-stitch alphabet with a holly sprig above the O.
You need DMC 321 for the letters, 890 for holly and blanc for a snow line.
At about 30 by 12 stitches, you get near 2.1 by 0.9 inches on 14 ct aida.
The tricky spot is the margin. Leave 4 blank stitches on every side, so you have room to sew the felt backing. I learned that on a crooked one.
- Best for: last-minute office gift swaps
- Avoid for: large trees viewed from across a hall
11. Heart-dotted letters for Valentine’s Day
Heart-dotted letters spell a couple’s names on a Valentine’s Day card or a small hoop for the nightstand.
The design uses rounded capitals with a tiny heart in place of every dot and crossbar. More ideas sit in our Valentines cross stitch patterns.
You need DMC 321 for the hearts, 815 for the letters and 3713 for a pale pink fill.
For two short names like ANNA and LEO, you get about 70 by 24 stitches, near 5 by 1.7 inches on 14 ct aida.
The tricky spot is the heart, 3 stitches wide and 3 tall. I count it twice. You see a lopsided heart from across the room.
- Best for: a Valentine’s Day card for a partner
- Avoid for: names over six letters each
12. Star-studded name banner for the Fourth of July
A star-studded name banner hangs on the porch for the Fourth of July and stays up through Labor Day.
The design spells your family name in block capitals, with a small five-point star between each word. You can stitch it on blue aida instead.
You need DMC 321 red, 796 navy and blanc. Three colours read clearly from the street.
With letters 12 stitches tall, you get THE MILLERS at about 105 by 20 stitches, near 7.5 by 1.4 inches on 14 ct aida.
The tricky spot is the star tips, which use quarter stitches. I swap them for full crosses on a porch piece. Nobody sees the difference.
- Best for: a porch display for summer holidays
- Avoid for: small 4-inch hoops
13. Teacher’s ABC sampler
A teacher’s ABC sampler is the end-of-year gift that stays on a classroom wall for years. You can add the class year, 2026, under the letters.
The design shows A to Z in two rows with a red apple and a pencil at the corners.
You need DMC 666 for the apple, 3346 for the leaf, 725 for the pencil and 310 for the letters.
At about 100 by 60 stitches, you get near 7 by 4.3 inches on 14 ct aida.
The tricky spot is row spacing. Leave 2 blank rows between the lines. I learned you need them, or the Q tail hits the row below.
- Best for: an end-of-school gift for a teacher
- Avoid for: a gift you must finish in one evening
14. 8-bit pixel alphabet for a gamer
An 8-bit pixel alphabet makes a desk sign for a teenage gamer’s birthday. It also suits a hoop above a games shelf.
The design spells LEVEL UP in square, blocky letters, each built on a 5 by 7 grid like an old arcade screen. Full crosses only, so kids can stitch it.
You need DMC 3843 cyan for the letters and 310 for a one-stitch shadow. Add 307 yellow for a coin.
At about 60 by 9 stitches, you get near 4.3 by 0.6 inches on 14 ct aida.
The tricky spot is the shadow, offset one stitch down and right. I stitch it after each letter, so you never mix the two up.
- Best for: teens and kids learning to stitch
- Avoid for: formal or vintage decor
15. Family name housewarming sign
A family name sign hangs by the front door of a new home. It makes a housewarming gift you can hand over in a 7-inch hoop.
The design shows the surname in serif capitals under a simple roofline. More cottage motifs sit in our house cross stitch patterns.
You need DMC 3777 for the roof, 3021 for the letters and 3363 for a small shrub on each side.
At about 84 by 56 stitches, you get near 6 by 4 inches on 14 ct aida.
The tricky spot is the roof slope, a stepped diagonal. I count each step before stitching it. One extra stitch tilts the whole house.
- Best for: a housewarming gift
- Avoid for: very long double-barrelled surnames
Halfway through the list is a good moment to pick a kit for the next evening. These sets keep the colours already matched to the chart.
Check the fabric count on the listing before you buy, since 11, 14 and 16 count stitch up at different sizes.
Dimensions Stamped Cross Stitch Baby Quilt 34" X 43"
Dimensions Stamped Cross Stitch Baby Quilt 34" X 43"
Dimensions 'Winter Cardinals' Counted Cross Stitch Kit
16 Count Dove Grey Aida, 15" x 9"
16. Stacked vertical name banner
A stacked vertical banner hangs beside a child’s door frame or on a bell pull in the hallway.
The design stacks a name letter by letter from top to bottom on a narrow aida band.
You need DMC 3810 teal for the letters and 3045 for small dots between them. Two colours keep a tall, thin piece calm.
With letters 12 stitches tall on a 2-inch band, you get a five-letter name at about 28 by 70 stitches, near 2 by 5 inches.
The tricky spot is centring letters of different widths. An I is 3 stitches wide, an M is 11. I centre each one, so you get a straight column.
- Best for: narrow walls and door frames
- Avoid for: names longer than seven letters
17. Monogram on a guest towel
A three-letter monogram on a guest towel makes a wedding shower gift you can stitch in a weekend. Towels hold up in the wash, so the gift gets used.
The design shows the couple’s shared initials in a classic serif, the surname letter larger in the middle.
You need DMC 931 blue for the letters, or 3768 to match a grey towel.
At about 40 by 18 stitches, you get near 2.9 by 1.3 inches on 14 ct waste canvas.
The tricky spot is pulling out the waste canvas threads. I dampen the canvas and pull one thread at a time with tweezers. Keep stitches firm.
- Best for: a wedding shower or hostess gift
- Avoid for: terry towels with deep loops
18. Graduation initial with a mortarboard
A graduation initial with a mortarboard makes a June gift, framed for a dorm desk or a first office.
The design shows one capital letter with a small cap tilted on top and a tassel down the side. Swap in the school initial if you prefer.
You need DMC 336 navy for the cap, 3820 gold for the tassel and the school colour for the letter.
At about 50 by 50 stitches, you get near 3.6 inches square on 14 ct aida.
The tricky spot is the tassel, a single backstitch line with three French knots. I stitch it last, so you do not snag it while working the cap.
- Best for: a high school or college graduate
- Avoid for: kids under ten stitching alone
19. Bunny-ear letters for Easter
Bunny-ear letters spell HOP on a spring hoop for the Easter table or a basket tag for a child.
The design gives each letter two tall bunny ears and a cotton tail on the last one.
You need DMC 3609 pink for the inner ears, 3078 yellow for the letters and blanc for the tail.
At about 40 by 24 stitches, you get near 2.9 by 1.7 inches on 14 ct aida.
The tricky spot is blanc on white aida, which hides. I stitch on pale green aida, so you can see every white stitch. Small kids can help.
- Best for: Easter baskets and spring tables
- Avoid for: white-on-white aida
20. Animal ABC blocks for a nursery quilt
Animal ABC blocks become a nursery quilt or 26 small frames along a playroom wall. Grandparents often stitch one block a week before the birth.
The design pairs each capital with a small animal, from alligator to zebra. The animals need 3 or 4 colours each.
You need about 12 DMC colours across the set, with 310 for every letter so the alphabet reads as one.
At about 30 by 30 stitches per block, you get near 2.1 inches square on 14 ct aida.
The tricky spot is keeping every letter the same height across 26 blocks. I baste a line 2 stitches above each letter. Then you check it.
- Best for: grandparents planning ahead for a nursery
- Avoid for: anyone who wants a quick finish
21. Snowflake letters for a winter hoop
Snowflake letters spell LET IT SNOW on a winter hoop that stays up from December to February. It also fits a gift for someone who loves cold mornings.
The design uses white block letters with tiny snowflakes scattered between the words.
You need DMC blanc, 3753 ice blue and 3760 for shadow. Stitch them on navy aida for contrast.
At about 70 by 40 stitches, you get near 5 by 2.9 inches on 14 ct aida. That fits a 6-inch hoop with room to spare.
The tricky spot is counting on dark fabric. I lay a white towel on my lap, so you see the holes clearly.
- Best for: a winter hoop from December to February
- Avoid for: stitching under weak lamp light
22. Pet name bone ornament
A pet name ornament hangs on the tree for the family dog. It is a quick gift for a friend with a new puppy.
The design spells the name inside a bone-shaped outline, with a paw print at one end. Cats work too, with a fish shape.
You need DMC 434 for the bone, 310 for the letters and 321 for the paw.
For a four-letter name like MILO, you get about 40 by 18 stitches, near 2.9 by 1.3 inches on 14 ct aida.
The tricky spot is the round bone ends. They step out one stitch per row. I check the curve before cutting the felt, and you should too.
- Best for: dog owners and new puppy gifts
- Avoid for: names longer than six letters
23. Small serif kitchen quote
A small serif quote hangs on the kitchen wall near the stove. You can also give it as a gift with a recipe book.
The design spells three short lines, such as BAKE SOMEONE HAPPY, in a neat 7-stitch alphabet.
You need DMC 3721 for the words and 3011 for a thin whisk under the last line. Two colours keep it readable from the doorway.
At about 100 by 40 stitches, you get near 7 by 2.9 inches on 14 ct aida.
The tricky spot is line length. Long lines tip the quote off centre. I stitch the middle line first, then you centre the shorter lines around it.
- Best for: a kitchen wall or a recipe book gift
- Avoid for: quotes longer than three lines
24. Rainbow alphabet for a playroom wall
A rainbow alphabet runs along a playroom wall or above a classroom whiteboard. Kids point at the letters while they learn them.
The design shows A to Z in one long strip, each letter in a different colour. It reads as one rainbow from across a room.
You need six DMC colours: 666, 740, 307, 702, 996 and 333. Repeat them in order across the strip.
With letters 10 stitches tall, you get a strip about 260 by 14 stitches, near 18.6 by 1 inch on 14 ct aida.
The tricky spot is length. I stitch it in three sections on one long piece, so you can hoop it without crushing finished letters.
- Best for: playrooms and classroom walls
- Avoid for: a small hoop
25. Couple initials for an anniversary card
Couple initials with a heart go on an anniversary card that later sits in a small frame on the dresser.
The design shows two capitals, such as K and J, with a small heart and plus sign between them.
You need DMC 3350 for the heart and 3799 for the letters.
At about 40 by 20 stitches, you get near 2.9 by 1.4 inches on 14 ct aida. It fits a 5 by 7 card window.
The tricky spot is the card. I iron fusible interfacing on the back, so you can trim close without fraying. Stitch it the weekend before, then glue it in.
- Best for: an anniversary card
- Avoid for: thin card stock that bends
26. Counted cross stitch letters on 28 ct linen
Counted cross stitch letters on linen make a grandmother’s heirloom band, framed beside old family photos. It suits stitchers ready to leave aida behind.
The design shows a short family motto in serif capitals, worked over two linen threads.
You need DMC 3371 for the letters and 3790 for a narrow border. Two colours suit linen’s soft look.
At about 110 by 30 stitches over two on 28 ct linen, you get near 7.9 by 2.1 inches, the same as 14 ct aida.
The tricky spot is counting over two. One missed thread shifts a whole letter. I baste guide lines every 10 stitches, so you can check each block.
- Best for: stitchers moving from aida to linen
- Avoid for: beginners or tired eyes at night
27. Mini signature alphabet
A mini signature alphabet signs the corner of every piece you finish, from a card to a framed sampler. Future owners will know who made it.
The design gives tiny capitals and numbers, only 5 stitches tall, so you can stitch initials and 2026.
You need one DMC shade from the piece itself, often 310 or 3371. Matching the piece keeps it quiet.
For initials and a year, you get about 30 by 5 stitches, near 2.1 by 0.4 inches on 14 ct aida.
The tricky spot is legibility at this size. An E and an F differ by one stitch. I use one strand, which you can read at a glance.
- Best for: signing every finished piece
- Avoid for: stitching with two strands
28. Harvest letters for a Thanksgiving runner
Harvest letters spell GATHER across the end of a Thanksgiving table runner. You can also frame it for a guest bedroom in autumn.
The design shows block capitals with oak and maple leaves tucked between them. Four warm colours carry the season.
You need DMC 920 rust, 3829 gold, 3362 green and 3781 brown for the letters.
At about 90 by 16 stitches, you get near 6.4 by 1.1 inches on 14 ct aida. That fits most runner ends.
The tricky spot is a runner end you cannot hoop. I stitch on an aida band, then you sew it onto the runner.
- Best for: a Thanksgiving table
- Avoid for: runners with thick quilted ends
29. Illuminated initial for a book lover
An illuminated initial makes a gift for a book lover, framed on a study wall. It is the project you save for a long winter.
The design shows one capital inside a square box, with vines and a gold border like a medieval book. Advanced stitchers only.
You need nine colours, including DMC 3750 blue, 498 red, 3820 gold and 3346 green.
At about 70 by 70 stitches, you get near 5 inches square on 14 ct aida.
The tricky spot is confetti stitches, single stitches of one colour. I park threads in their own column, so you stop cutting a new length for every stitch.
- Best for: advanced stitchers and book lovers
- Avoid for: beginners or any deadline
30. Birthday card initial with balloons
A birthday card initial is the one you stitch the night before the party. It fits a 4 by 6 card with a round window.
The design shows one bold capital with three small balloons rising from its top corner. You can swap balloons for candles.
You need DMC 553 purple, 3846 aqua and 3824 coral for the balloons, plus 310 for the strings.
At about 30 by 30 stitches, you get near 2.1 inches square on 14 ct aida.
The tricky spot is the balloon strings. They are backstitch, one strand. I add them after mounting, so you see where the window cuts.
- Best for: a last-minute birthday card
- Avoid for: kids under eight
31. Counted cross stitch alphabet free practice band
A practice band becomes a pincushion or a needle book cover once you finish testing an alphabet.
The design is simply the full A to Z of any counted alphabet, free or bought, stitched in one line on scrap aida. It costs you one evening.
You need one DMC shade you already own, like 310 or 321. Scrap fabric is enough.
For a 7-stitch alphabet, you get about 160 by 7 stitches, near 11.4 by 0.5 inches on 14 ct aida.
The tricky spot is the free chart itself. Many skip a letter or misdraw the G. I stitch the band first, so you catch errors before the real project.
- Best for: testing any alphabet before a gift
- Avoid for: a finished gift on its own
Pick a kit and stitch one of these cross stitch alphabet ideas tonight. A complete kit saves the trip for floss and fabric.
Gift sets with two or three hoops work well for a stitching friend.
Bradove Classic Embroidery Learning Kit for Adults and Kids
Bradove Classic Embroidery Learning Kit for Adults and Kids
ITSTITCH Printed Cross Stitch Kits for Adults 11CT 17×22 in DIY Embroi
dery Starter Kits Easy Patterns Embroidery for Girls Crafts DMC Stamped Supplies Needlework Fairy Tales Cat Ra
How do you choose a cross stitch alphabet chart?
Three checks decide whether a chart will waste your evenings. You can run all three in a minute.
- Letter height in stitches. Check the stated height → free charts often skip it, and your name runs off the fabric.
- Number of DMC colours. Check that the key lists every shade → free charts leave you guessing a colour mid-letter.
- A readable chart. Check that symbols differ in shape, not only colour → a black-and-white print turns two shades into one.
If it goes wrong
- A letter is taller than the rest. Unpick the extra row. Many free alphabets misdraw the tails of G, J and Q.
- The name sits off centre. Add the letter widths and gaps, halve the sum and restart from that column.
- Two letters touch. Leave 1 blank stitch between letters and 2 between words.
- Backstitch looks fuzzy. You used two strands. Switch to one and redo the line.
- White letters vanish. Stitch on coloured aida, or outline them in DMC 762.
Key takeaways
- Choose the letter height in stitches before you buy fabric.
- Divide the stitch count by 14 for inches on 14 ct aida.
- Leave 1 stitch between letters and 2 between words.
- Use one strand for backstitch letters and two for crosses.
- Stitch a test band before any gift with a deadline.
When the free version isn’t enough
A free alphabet gives you letters, not a layout. You still space the name, pick the floss and hope the chart has no errors.
A full kit removes that work. You get aida cut to size, floss sorted by number and a chart already checked for spacing.
For a gift with a date, I would rather open a kit than redraw a free alphabet. Our Valentines cross stitch kits and house cross stitch designs show a finished, checked layout.
Common questions
How many stitches tall should a cross stitch alphabet be?
A cross stitch alphabet for a name on a hoop works best at 9 to 14 stitches tall. That gives you letters between 0.6 and 1 inch on 14 ct aida.
Go smaller, around 5 to 7 stitches, for bookmarks, signatures and cards.
How do I centre cross stitch letters on fabric?
You centre cross stitch letters by adding every letter width plus the gaps, then halving the total. Mark that column on the printed chart.
Fold the fabric in half twice to find its centre. Start from the middle letter and work outward.
Is a free counted cross stitch alphabet good enough for a gift?
A free counted cross stitch alphabet is fine for practice, but check it before a gift. Many skip a letter height, misdraw a G or Q, or give no spacing.
Stitch a test band on scrap aida first. You catch the errors in one evening.
Can you mix two cross stitch alphabets in one piece?
You can mix two alphabets if one is clearly larger, such as a script name over a block date. Keep at least 3 stitches of height between them.
Two alphabets of similar size look like a mistake, not a choice.
Should cross stitch letters use one strand or two?
Cross stitch letters in full crosses use two strands on 14 ct aida. Backstitch letters and outlines use one strand, or they blur.
Tiny letters under 6 stitches tall read best with one strand throughout.
How long does it take to stitch a name in cross stitch?
A five-letter name 10 stitches tall takes most stitchers 2 to 3 hours. That covers about 250 stitches at a steady pace.
Add an hour if you include backstitch or a border, and another if you are new.























































